Romania, Serbia
no information
distribution channels
The company was founded in 1992 with headquarters in Ruse, owner eng. Veselin Vasilev Manev. The company manufactures machines and equipment for the production of lines for thermo-insulating glass units and machines for peripheral processing of flat glass.
Mode of positioning the glass sheet on the working top of the table: 1. Manual positioning: - tilt the top board of the machine by lifting it to 80 degrees from the one side. Place the glass sheet on the mobile supports that come out of the top board as it is lifted. Place the top board horizontally and position it manually; - manually feed the glass sheet without tilting up the top board to 80 degrees. This operation is performed by using a fork-type device that comes out of the top board of the machine. Place the glass sheet on it. The fork, as it recedes back into the table, occupies a horizontal position and places the glass on the top board. 2. Automatic feeding to the flat glass cutting tables - together with one-sided or double-sided Automatic feeding Complex; by means of multi-operator (up to 10 pyramid stands for glass) automatic feeding Complexes (RZK-M) and (RZK-D-M) which provide rapid and automatic feeding of the glass sheets to the automated table. - For this purpose the cutting table is equipped with in-built belt conveyors.
Mounted on the chassis are a hydraulic aggregate and a vacuum pump. The hydraulic aggregate feeds the prescribed oil pressure to the outgoing trolley, respectively the rotating frames. The vacuum pump provides the necessary vacuum for the suction units, which help lift the glass panes. The two rotating frames with the girdles of the suction units run on bearings in the chassis and are driven by hydraulic cylinders. This station for fitting glass panes is equipped with a separation fixture. The separation fixture guarantees that sticking together glass panes can be released and lifted. The separation fixture, however, is applicable and necessary only in the case of large size panes. The transportation rollers are put in motion by means of a chain gear and an electric motor fixed to the bottom side of the swivel-mounted frame.
Technical characteristic: - Stainless steel washing units; - 4-8 washing brushes; - The washing sensibility of coated glass; - Air fun (Ventilator) with capacity of 6000 m3/min; - Washing water purification system; - Working direction from left to right; - Monitored washing control; - Combining two glasses manualy; - Harmonious working capability washing mashine vertical press and tilt table; - Vertical press with couple rubber rollers; - Working in automatic between the thickness from 10 mm to 40 mm; - Pneumatic sinking plot with follow-up horizontal transportation of the glass package;
"MANEV-WW-VESELIN VASILEV" Sole Trader has a rich experience in the production of machines and equipment for lines for thermo-insulating glass units and flat glass processing machines.
"MANEV-WW-VESELIN VASILEV" Sole Trader offers machines for glass units
NACE Codes
"MANEV-WW-VESELIN VASILEV" Sole Trader is looking for manufacturers of joinery made of wood, aluminum and plastic.
NACE Codes