Stucco for filling cement-based joints, with selected granulometry and with a high resistance to water; it serves for the filling of 0 - 5 mm joints. TECHNICAL FEATURES -It is a powder, cement-based material, with natural stone powder of selected granulometry, synthetic resins, hydrophobic additives and coloring pigments. -Easily cleaned. - Its final result is a smooth surface - Waterproof - High resistance against bases (alkali) and detergents. - Resistant to corrosion. - Resistant to UV radiation. - Prevents the process of fluorescence. According to EN 13888 classification, it belongs to CG2 category.

MONOLIT Cement-based, mono-component, waterproof mortar. CHARACTERISTICS Cement-based, mono-component, waterproof mortar which possesses good isolating qualities to moisture and protects concrete from carbonizing. It is suitable to be used for the waterproofing of water deposits, basements, etc. Easy to apply, low application costs and does not have corrosive effects for concretes reinforced with steel. AREA OF APPLICATION It is used to protect concrete and plaster surfaces and walls from humidity. Suitable to waterproof water deposits, basements, underground buildings, etc. Suitable for the internal waterproof of underground areas, such as: basements, because it is resistant to high pressures thanks to the strong bond it creates with the support.AQUABLOCKER PU is a polyurethane-based, waterproofing coating material for terraces, with high content of polyurethane resins. ●Offers high waterproofing and elasticity. ●It is characterized by excellent adhesive qualities in all cement-based surfaces, in surfaces made of bricks, wood or metal, and on every other waterproofing material. It can be also used in unleveled layers. ●It ensures high elasticity, thus avoiding cracks and crevices that can be created with time. ●The white color of waterproof during summer helps in lowering the temperature. It is hermetic but allows vapor permeability. AREA OF APPLICATION AQUABLOCKER PU is used as waterproof in terraces, balconies, walls and places with humidity. It is easily applicable, thus creating a waterproofing membrane with high elasticity and mechanic resistance, without creating cracks or shrinkage. It is also easily applicable in difficult surfaces such as angles, junctions of different materials that create joints, etc. AQUABLOCKER PU is not recommended to be used for the waterproofing of underground basements.

FLATEX Cement-based, leveling mortar, for outdoor and indoor environments. TECHNICAL FEATURES • Cement-based mortar, with sand of selected granulometry and modified polymers. • Serves to create a flat layer for the application of waterproofs and adhesives. AREA OF APPLCIATION It is used to level indoor and outdoor supports, such as: to level pools before making them waterproof, and also other supports before the application of tile adhesives. During the product application, the temperature of the environment should be from +5°C up to +35°C. SUPPORT PREPARATION The support where the material will be applied should be dry, clean, uniform, absorbent and stable. There should not be external residues, such as: oils, varnishes, petroleum, etc.EPOFLOOR FG – 8700 is a cement-based, and epoxy-based resins, leveling product, and free of solvents. It offers the following advantages: - Excellent mechanical resistance. - Very good adhesion with the area where it is applied - High resistance to moisture. - It has excellent leveling qualities. - No corrosive effect. It is classified as CT - C50 - F10 - AR0,5 according to EN 13813. AREA OF APPLICATION EPOFLOOR FG – 8700 is used for repairs and leveling in surfaces that will be used for: polyurethane coating, PVC flooring, laminate wood flooring, etc. EPOFLOOR FG – 8700 is applied when the concrete is relatively fresh, in order to create the appropriate surface (at least, with 2mm thickness) for the application of epoxy layers, thus avoiding problems with detachment, etc. it is also suitable as a final layer, in a thickness of 3mm, for smooth surfaces, and to increase the surface’s resistance towards mechanical loads. TECNOFLOOR 30 Self-leveler with high content of cement and modified additives. DESCRIPTION TECNOFLOOR 30 is a cement-based self-leveler, with modified additives, which is used to lay and level floors. It is classified as CT - C40 - F10 - AR2 according to EN 13813 standard. AREA OF APPLICATION •It is used to prepare smooth surfaces or layers prior to the application of materials such as: ceramic tiles, parquets, etc. •It is also used as a final layer for foundations, storehouses, lofts, etc.

It is characterized by an excellent opening and workability and high outstanding coverage 12 m2 sack 25 Kg -It facilitates application in indoor and outdoor surfaces which are filled with traditional mortar and pre-prepared mortar as well. -It is applicable in a thickness up to 3 mm. It is suitable for finishes in surfaces filled with traditional or pre-prepared cement-based or lime-based mortar. It can be covered with paint or other coatings of mineral and synthetic nature. FINO ANTIQUE Product for finishes of antique view. TECHNICAL FEATURES Powder material produced based on HTT technology (Horman Transpirance Tecnology) which prevents mold creation and allows the transpiration of cement-based, hydrated lime, marble carbonate sand and marble of selected granulometry, synthetic resins and special additives walls. It is characterized by an excellent opening and workability, and facilitates application in indoor and outdoor surfaces which are filled with traditional mortar and pre-prepared mortar as well. It is applicable up to a thickness of 3 mm. It is suitable for finishes in surfaces filled with traditional or pre-prepared cement-based or lime-based mortar. It can be covered with paint or other coatings of mineral and synthetic nature. GRAFIATO SILEX Decorative and ready to use coat, that serves for the treatment of facades and indoor silicone-based surfaces. It is an ecologically tested product. Manufactured based on HTT technology (Hörman Transpirant Tecnology) ), it allows wall airing and mold prevention. Thanks to the new formula with synthetic fibers and special additives in its content, this product does not allow cracks and impurities to unify with it, thus self-cleansing easily. - It allows vapor permeability of the wall. - Forms a stable structure. - Closes plaster cement-lime based cracks. - Forms a beautiful and protective structure against atmospheric agents. - It is characterized by good opening and workability. - It is characterized by a long working time. - Conform EN 998 - 1. - Easily applied product. - The product has high self-cleaning properties. It is suitable to create decorative coatings with excellent waterproof, adhesive and elastic qualities. It is also used to create decorative coatings on surfaces filled with basic insulating mortars, which have been flattened beforehand with TECNOFIX or CONEXION 99 in the thermal insulation systems, after having been treated with TECNOFIX LIQUID.

Powder material, with cement, lime, stone sand of selected granulometry, synthetic resins and special additives. - It is characterized by an excellent workability. - High mechanical resistance - Free of vertical slip - Adhesion abilities in walls and ceilings It is used as a basic mortar to stucco all types of supports, such as: brick or block walls, etc. The product is applied through a machinery or hand. During the application of product, the support and environment temperature should be from +5°C up to +35°C.

It is a powder material, with cement, lime, sand of selected granulometry, hydrophobic synthetic resins and specific additive. - It characterized by an excellent opening and workability, thus facilitating the application of product in supports filled with traditional or pre-prepared mortar. -It offers long time of workability, very good adhesion with the support and great leveling of the surface. -It creates a great waterproof in the surface where it is going to be applied, thus facilitating even more the application of decorative coating. -It creates a good bond between the basic mortar and decorative coating. -It is applicable for thicknesses up to 3mm. HYDRO PRIMER DESCRIPTION Elastomeric primer for surfaces where waterproof will be applied. Aqueous polymer dispersion is applied on porous surfaces thus by significantly increasing adhesiveness between elastomeric-based hydro isolators and support. HYDRO PRIMER has penetrating properties in all pores of the surface where waterproof will be applied, thus improving and enhancing the adhesive ability between the waterproof and the surface will be hydro-insulated. AREA OF APPLICATION HYDRO PRIMER is a ready to use PRIMER, which reinforces considerably waterproof adhesion on surfaces made of concrete, mortar, plaster and gypsum panels. PU 88 PRIMER Two component Polyurethane-Epoxy base primer. DESCRIPTION PU 88 Primer is a bi - component epoxy- based and water- based product. The product offers high physical and mechanical resistance, such as resistance to abrasion, resistance to water, acids, alkalis, petroleum products etc. It is used before the application of Izoelastic PU. AREA OF APPLICATION PU 88 PRIMER is used as a PRIMER when we use the product IZOELASTIC PU in waterproofing processes, in cases of terraces, etc.

EPOPAINT SL 40 is used as a coating layer on the floor with high requirements in mechanical and chemical resistances. It is applied in cement-base substrates, such as: the leveling mortar of floors, concrete and amianto cement. It effectively protects and decorates cement- based industrial floors in hospitals, wineries, dairy industry, dairies, kitchens, laboratories, slaughterhouses, car washes, garages and machine shops, petrol stations, pools and fountains. Surfaces where EPOPAINT SL 40 product is applied may be in direct contact with foods. It is applied to metal and wood surfaces after primed with EPOMETAL W – 5300, such as floors made from sheet steel, MDF, or chipboard. Its powdering with the quartz sand QUARTZ of 0-0.3 mm granulometry, creates anti-slip surfaces. PARQUET VARNISH Mono-component, polyurethane-based varnish, with high resistance to consumption, for high-traffic floors. FEATURES Polyurethane-based varnish, for indoor and outdoor wood surfaces. Easily coated; manifests good elasticity and is excellently laid. It is particularly resistant to humidity and snow, while the UV filters it contains protect the wood from ultraviolet sun rays. Highlights s and protects the natural beauty of all types of wood, accentuating their texture.

Flexit is used as elasticizer in the following cases: • In mono-component sealants that are applicable with a brush, such as (MONOFLEX), in cases when there are cracks or crevices in the surface where it will be applied. • The tile adhesive (DW), for the laying of tiles on the surface which are characterized by cracks, crevices and in those cases when they are exposed to vibrations and contraction - expansion. • Suitable to adhere tiles and polystyrene panels on metal, wood and substrates with high deformability. • Also, FLEXIT is recommended to be used as elasticizer in all cement-based products. There is also a product named BETOPLAST Plasticizer, Type A - additive for waterproofing in concrete preparation. BETOPLAST is a liquid additive that acts as a plasticizer and waterproofing agent in concrete and, thus offering the following advantages: • Significantly increases water impermeability in positive and negative pressure or capillary absorption. • Improves workability without the need to increase the amount of water. • Eliminates the air within the concrete mass. • Does not contain chlorides and other irritating agents. • It is compatible with all types of Portland cement. AREA OF APPLICATION BETOPLAST is a necessary additive for the preparation of concretes with high resistance to compression, for concretes exposed to atmospheric agents, as well as for concrete that will immerse into the water.

EPOWRAP PRIMER is used as a PRIMER in cases when you use one of the product of EPO Wrap line of products, to reinforce concrete structures. EPOWRAP FG 200 Epoxy-base, bi-component adhesive, for fabrics with carbon fiber. FEATURES EPOWRAP FG 200 is a bi-component, epoxy adhesive in the form of paste. After solidification, it ensures high adhesion with the support, excellent strength and increase of resistances in compression and flexion. The product is classified as a structural bonding agent for outdoor concrete reinforcement, according to EN 1504 - 4. AREAS OF APPLICATION EPOWRAP FG 200 is used for connecting carbon fabric, for the structural reinforcement of building structural elements in systems (F.R.P). MANNER OF APPLICATION Surface preparation: The surface must be: • Chemical, sufficiently strong and stable. • Free of materials that might prevent adhesion, such as dust, loose particles, grease or oil, etc. • It is recommended to treat the surface mechanically by roughening it. • If there are cracks in the concrete, they should be repaired by injection, using materials like EPOLOT. • The substrate should be as flat as possible. • Damaged areas should be repaired using EPOWRAP FG 200. MIXING THE COMPONENTS Components A and B are packaged in two separate containers, in predetermined mixing ratio by weight. Mix thoroughly the entire amount of component A with the entire amount of component B. The components should be stirred for about 5 minutes with an adequate mixer.

SILIKON D-707 ULTRACOLOR Neutral silicone, with adhesion properties on metallic and building materials, water resistant and FERROSEAL Silicone for sealing and adhering metals